Features and Benefits
- Selectable digital I/O combination by software
- Accepts PNP or NPN sensors
- Instant event messaging by TCP/UDP/e-mail/SNMP trap
- Easy-to-use Click&Go™ Logic for local output control
- PC-based configuration utility and web console
- I/O control over Modbus/TCP and SNMP protocol
- Windows/WinCE VB/VC and Linux C API
- Peer-to-Peer I/O without controller
Introduction
Flexible digital input/output configuration
The ioLogik E2212 provides system integrators with the flexibility to handle various field demands with channels that can be configured by software for input or output operation. You can configure the I/O channels to suit your needs, for combinations such as 12 inputs/8 outputs, 8 inputs/12 outputs, or 10 inputs/10 outputs.
Single Ethernet DIO that Accepts 3 Types of Sensors
Unlike traditional Ethernet I/O products, the ioLogik E2212 can connect to dry contact, PNP, and NPN sensors at the same time. You can choose the sensor type based on your wiring approach.
• LAN:
Ethernet 10/100Mbps, RJ45
Protection 1.5KV magnetic isolation
Protocols Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP(MIB for I/O and Network), HTTP, SNTP
• Serial:
Interface RS-485-2w: Data+, Data-, GND
Serial Line Protection 15KV ESD for all signals
• Serial Communication Parameters:
Data Bits 8
Stop Bits 1
Parity None
Flow Control None
Protocols Modbus/RTU
Speed 1200 to 115200 bps
• Digital Input:
Channels 8 fixed points
Sensor Type 2 6-point groups for NPN/PNP type
I/O Mode DI or Event Counter (up to 900Hz)
Dry Contact Logic 0: short to GND
Logic 1: open
Wet Contact Logic 0: 0 to 3 VDC
Logic 1: 10 to 30 VDC
Common Type 6 points per COM
Isolation 3K VDC or 2K Vrms
Low Speed Counter/Frequency 900 Hz, power off storage
Over-voltage Protection 36 VDC
Poweroff Counter Memory 48 Bytes
• Digital Output:
Channels 8 fixed points sink, 45 VDC, 200 mA
Magnetic Isolation 2K Vrms or 3K VDC
Pulse Wave Width 10 ms/100 Hz
Over-voltage Protection 45 VDC
Over-current Limit 400 mA (typical)
Over-temperature Shutdown 175°C (min.)
• DI/DO Configurable Channels:
Channels 4
I/O Mode DI or Event Counter (Up to 900 Hz)
DO or Pulse Output (Up to 100 Hz)
• Physical Characteristics:
Wiring I/O cable max. 14AWG
• Environmental Limits:
Operating Temperature -10 to 60°C (14 to 140°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
• Power Requirements:
Power Input 24 VDC nominal, 12 to 48 VDC
DO Power 24 VDC nominal, up to 30 VDC
• Agency Approvals:
EMI FCC Part 15, CISPR (EN55022) class A
EMS IEC 61000-4, IEC 61000-6
Safety UL508
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
• Warranty:
Warranty Period 2 years
Details See www.moxa.com/warranty